Why is the peanut roasting machine blocked when working?

Peanut roasting machine is a professional equipment for roasting peanuts. Like any other machinery, peanut roasting machine may encounter problems from time to time, especially if it is not used or maintained correctly. One of the more common problems is blockage in production. When the peanut roasting machine is blocked, if it is not solved in time, it will lead to uneven roasting, burning peanuts and even damaging the machine. Therefore, it is particularly important to find out the causes of the blockage and eliminate the faults in time.

Causes of blockage in peanut roasting machine:

1, The machine is overloaded.

One of the most common reasons for the blockage of peanut roaster is that the machine puts in too much peanut raw materials, which exceeds the maximum load of the machine. When too much peanut raw materials are put in, there is no enough space in the peanut roaster, which will cause peanuts to stick together or stick to the wall of the peanut roaster. If peanuts overheat or burn, this will also increase the risk of fire or smoke. In order to prevent excessive peanut load, it is important to follow the instructions of the machine and control the amount of peanuts roasted each time.

2, The peanut is mixed with foreign objects or peanut crumbs.

Another possible reason for the blockage of the peanut roaster is the presence of peanut crumbs or foreign objects, such as shells, stones or dust, in the roasting chamber. With the passage of time, these substances will accumulate and block the vents or heating elements of the machine, thus affecting the performance and safety of the machine. Peanut crumbs can also become breeding grounds for bacteria or molds, thus polluting peanuts and bringing health risks. In order to prevent the blockage caused by peanut fragments or foreign objects, we should clean the peanut roaster regularly, especially after each use. We can use a soft brush or cloth to remove any remaining peanuts or debris, and use a vacuum cleaner or compressed air to blow away any dust or particles that may accumulate in the gaps or corners of the machine. We should also check peanuts before roasting them to ensure that the machine is clean before working.

3, Machine failure.

In some cases, the blockage of peanut roaster machine may be caused by machine failure, such as motor, fan, thermostat or timer failure. The failure of these components will affect the air and heat circulation in the machine, resulting in uneven roasting or overheating. Faulty parts can also cause strange noise, vibration or smell of the machine, which may be a sign of impending failure and should be paid enough attention. In order to prevent blockage or other problems caused by faulty machine parts, we should regularly check whether the machine has any signs of wear or damage, in addition, we should do a good job in maintaining the machine in daily use.

If the peanut roaster machine has broken down, we can solve it according to the following steps:

1, Turn off the machine and power supply.
2, Let the machine cool for at least 15 minutes before turning it on.
3, Remove any visible peanuts or debris from the chamber with a soft brush or cloth.
4, Check whether there are foreign objects in the vents or heating elements.
5, Use a vacuum cleaner or compressed air to blow away any dust or particles that may accumulate in the machine.
6, Turn on the machine again and run it for a few minutes without any peanuts to see if it works normally.
7, If the problem still exists, please refer to the user manual or contact the manufacturer for further help.

Although the blockage of peanut roasting machine happens from time to time, we can take certain measures to reduce or even prevent it. If the blockage has occurred, we must stop the machine in time to investigate the cause and solve it to ensure the normal production of the machine. If there are other problems that are difficult to solve during the use of peanut roasting machine, please contact us in time!