Safety rules of gas peanut roasting machine

Peanut roasting machine, which involves roasting peanuts and other nuts, usually uses electricity, gas or coal as heat source. Today, let’s discuss the matters needing attention in peanut roasting machine when using gas as heat source.

Safety rules of gas peanut roasting machine

1. Indoor ventilation is required in the job site, and exhaust facilities such as exhaust fans can be installed to eliminate the waste gas generated by gas combustion in time.

2. It is forbidden to stack flammable and explosive materials and other solid liquid fuels in the workplace. It is recommended that users do not use two kinds of gas sources at the same time.

3. In order to check whether the indoor gas facilities are in good condition, users often apply soap solution to the joints of the gas pipeline system to check whether there is air leakage, and it is strictly forbidden to use open flame to try leakage.

4. In the process of using gas should have specialist care, in case of accidents, cut off the main trachea gas source after using gas.

5. After the work is finished, cut off the air supply, and stop the machine when the roller temperature drops below 100 degrees to prevent the equipment from deforming.

What is used as heat source needs to be determined according to the actual situation of peanut roasting machine, but in any case, safe operation and production are issues that need special attention, and need to be paid enough attention!