Maintenance points of peanut roaster machine

Peanut roaster machine has the advantages of high temperature resistance, corrosion resistance, fuel consumption saving, high thermal efficiency, wide application and good roasting effect. The emergence of peanut roasting machine has greatly enriched our lives. The maintenance of the machine is very important during the use of the peanut roasting machine.

–> American client ordered KL-1 peanut roasting machine from our company

Maintenance points of peanut roaster machine are as follows:

First, check the equipment.

Before the peanut roaster works, it is necessary to check the lubrication and air tightness of the rotating parts on the ventilator, motor and dust collector, and pay attention to the performance of cooling and installation devices. At the same time, the idler should be prevented from being skewed in different directions. In the process of adjustment, in order to make the machine barrel move up, it is necessary to pour some lubricating oil on the surface of the idler to increase the surface friction. On the contrary, if you want to make the cylinder slide down, you can use some grease to reduce the surface friction.

Second, check the wearing parts.

If there is any impact sound when the rotating gear is running, it should be stopped immediately for inspection and the abnormal sound should be eliminated. Pay attention to check the degree of wear of easy-to-wear parts and replace worn parts at any time.

Third, pay attention to the temperature.

If the bearing temperature of peanut roaster rises, it should be stopped immediately for inspection, and then turned on after the problem is solved. The temperature in the peanut roasting machine should be detected, and the temperature in the machine should be accurately judged according to the changing trend of the temperature in the peanut roasting machine.

Fourth, pay attention to parameter setting.

Roasting should be controlled under certain technical parameters, such as temperature, humidity and wind speed, so as to ensure that the components of peanuts are maintained during roasting. In addition, the stacking thickness of peanuts will affect the roasting speed. The stacking thickness should be controlled reasonably, and the heat exchange area and ventilation should be increased to speed up the roasting speed.

Fifth, the parts that are easy to loosen should be regularly overhauled and maintained.

The bearing, bearing seat, lifting bucket and lifting bucket screws of peanut roaster are easy to loosen, so it should be overhauled frequently. Conveyor bearings and belt connecting buckles should be checked and replaced frequently. Clean up the sundries in the inner air duct of the peanut roaster machine, clean up the adhesion of the blades of the fan, clean up the dust accumulated in the settling tank of the exchanger of the hot blast stove, and clean up the tubes and pipes one by one. Speed regulating motor speed regulator returns to zero for standby.

Sixth, take rain and snow protection measures.

If the peanut roasting machine is operated outdoors, corresponding rain and snow protection measures must be taken, and the whole machine needs to be maintained and overhauled on a large scale every year.

The above are the maintenance points of the peanut roaster machine. Doing a good job in the maintenance of the peanut roaster can not only make the production more smooth, but also prolong the service life of the machine. If you have any questions or problems about the use of peanut roaster machine, please contact us in time, and we will do our best to provide you with a satisfactory solution.